When the wood grabber is abnormally smoking, according to the color of the smoke, you can roughly understand which accessories have the problem. If there is any problem in use, please contact our manufacturer in time.

The overhaul of the wood grabber includes: power unit, working machinery, rotating mechanism, operating mechanism, transmission mechanism, self-locking mechanism and auxiliary machinery. Judging from the development trend of industrial equipment for engineering projects in recent years, the development trend of wood grabbers is relatively fast, and wood grabbers have long become one of the important industrial equipment for engineering projects in engineering construction.

How to deal with the milky white smoke of the wood grabber:

Due to the poor atomization or droplets of the diesel pump of the wood grabber, the diesel engine part does not catch fire; the diesel engine has ice supply; it is not difficult to find that the cylinder head and cylinder liner are cracked, and the cylinder gasket is damaged, so that the main fuel tank of the engine has ice; the equipment The temperature is too low.

Common solutions: remove or replace the atomizing nozzle, adjust the spray pressure; the oil and water in the water tank are clear, replace the cylinder head gasket, cylinder liner, and cylinder head.

How to deal with black smoke from the exhaust pipe of the wood grabber:

Due to the long-term load operation of the diesel engine, the wood grabber caused black smoke from the exhaust pipe of the exhaust pipe, serious carbon deposition in the combustion chamber of the diesel engine, abnormal operation of the diesel engine pump, too late fuel supply, and insufficient ignition. Excessive oil supply, diesel engine quality does not meet the requirements; cylinders, cylinder liners, piston rings, piston rings, etc. destroy gas and gas; air inlets are blocked, resulting in insufficient air inlets and inexhaustible sewage treatment gas.

The wood grabber applies for ignition because the vehicle oil enters the combustion chamber of the diesel engine, the piston ring and the cylinder liner do not run in, the vehicle oil enters from the gap, and black smoke is discharged from the exhaust pipe; the piston ring is stuck on the drying groove, and the curve of the piston ring is It is installed backwards and lacks the function of oil leakage; the piston ring is damaged too much, and the vehicle oil runs into the combustion chamber of the diesel engine from the opening gap; the oil volume of the diesel engine oil pan is too high; the air filter is too much oil; the cylinder and Damaged plastic hose with excessive clearance.

Commonly used treatment methods: remove carbon deposits in the combustion chamber of the engine; grind the cylinder to repair or replace the cylinder liner, hydraulic cylinder and piston ring; adjust the amount of oil provided by the oil pump, replace and replace the product oil that meets the requirements; clean the air filter and remove the muffler carbon deposits inside. For new or overhauled electric locomotives, try to run on the diesel engine as required, so that all prefabricated parts can be properly meshed; identify the assembly line logo and install the piston rings properly; replace the qualified or upgraded specifications and models to check the piston rings of the diesel engine; Find out the reason for the increased oil level in the diesel oil sump, release the excess car oil in the diesel oil sump; reduce the oil baffle of the car oil in the oil filter; remove the valve guide.