Telephone: 86-18937010258
86-0370-5700888
Phone: 86-18438296999
Email : henanyonggong@163.com
Website: en.hnygjx.com.cn
Production base: 2 xishan road, yongcheng economic and technological development zone, henan province
The reliability and service life of the steel grasping machine are closely related to the normal use, maintenance and maintenance of the users in addition to its own manufacturing quality.
Grasp the steel mill
I. diesel engine
The use, maintenance and maintenance of diesel engine should be in accordance with the provisions of the operation and maintenance manual.
Two, check the maintenance points
Regular inspection and timely maintenance is the key to maximize the productivity and extend the service life of the machine, so the following points must be noted in the process of inspection and maintenance:
1. When inspecting and maintaining the steel grasping machine, put the steel grasping machine on the flat ground, put down the working device, and turn off the diesel engine.
2, to close the pilot safety lock, that is, cut off the pilot loop, and then maintenance.
3, work after the high temperature of the hydraulic oil, maintenance oil, seal, refueling or oil can not be directly removed, to extinguish the diesel engine, operation pilot handle pressure relief, maintenance. Personnel should not touch the tubing to avoid burns.
4, hydraulic system safety valve and overload valve has been adjusted when leaving the factory, can not be changed at will, to avoid accidents.
5, avoid maintenance on the ramp, in the body weight under the steel will walk or turn.
6, disassemble and install hydraulic parts do not let dust and other sundry mixed into the hydraulic system, the connection surface shall not be damaged, if there is damage to be repaired, maintain the original accuracy.
7, the disassembly joint to clean, do not damage or leakage seal ring. Hose assembly must not be twisted.
