Due to the harm of the natural environment temperature, it will cause many difficulties in the use of the wood grabber. For example, the "cardiovascular" parts of the diesel engine of the entire equipment, because the temperature increases, the viscosity of the oil decreases, the actual effect of lubrication is also reduced, and the driving force is weakened. , the internal parts are also easily damaged, which is a common problem. Especially in summer, when the wood grabber is well maintained, careful maintenance of the diesel engine is necessary, which can increase the service life of the entire equipment.

1. Engine oil and various lubricating oils should be checked frequently for oil leakage.

2. The battery fluid should be filled immediately, the current should be appropriately reduced, and the embrittlement route should be replaced immediately. The volume of the fuse should meet the application regulations, and the mechanical equipment should be equipped with a fire extinguisher.

3. Check the drive belt of the centrifugal pump cooling fan drive system. After the transmission belt is used frequently in summer, it will cause fatigue deformation and reduce the actual cooling effect. When replacing the drive belt, pay attention to the model, specification and length, and adjust the tightness appropriately.

4. Regularly check the efficiency of the braking system of the entire equipment in order to deal with and eliminate the common faults of the braking system in time and reduce hidden dangers.

5. Always pay attention to the water temperature. When it reaches 100 degrees Celsius and above, immediate and effective measures need to be taken. You can choose a shady spot near the principle of parking and wait for the temperature to drop. The key is to not shut off immediately, to avoid internal overheating causing the engine to pull on the cylinders.

6. When going out to work, do not make the skew angle of the wood grabber more than 15° to prevent the upper structure from infiltrating into the water and damaging the heat pipe radiator. The chain rail tensioning hydraulic cylinder should be tightened at all times to remove the sludge on the hydraulic cylinder and prevent the hydraulic cylinder from rusting.

7. In hot summer, drivers consume a lot of energy and get tired easily. To ensure adequate sleep, so that work efficiency will be higher.

The wood grabber drives and engineered industrial equipment had to be adjusted immediately to meet the expected conditions and weather the summer heat.