First of all, before using the steel grabber, it is necessary to check whether the equipment meets the safety standards and is installed correctly. The parts to be checked include the machine itself, the control system, the electrical system and the inspection system. Install the equipment stably on a smooth ground, and all transmission and moving parts should be kept dry, clean, and free of oil. If any abnormal situation is found, contact maintenance engineers.

Secondly, before using the steel grab machine, the operator needs to carry out the necessary training and authorization to ensure that the equipment can be operated correctly and safely. Observe correct operation and safety procedures, such as emergency stop procedures, locking procedures, and maintenance procedures. It is not allowed to change the operating state of the equipment during the working process, and must comply with the prescribed procedures. Avoiding safety accidents is also one of the key points in the operation process.

Third, before using the grasping machine, the processing workpiece needs to be examined in detail, especially in the processing of irregular, irregular shape and thin plate and light workpiece, need to be examined more carefully.

Fourth, in the use of grasping machine processing workpiece, must use the appropriate fixture and fixture device, grasping machine fixture should be adapted to the workpiece, to ensure that the workpiece is firmly fixed. During processing, excessive pressure and excessive extrusion should be avoided, causing unnecessary damage to the workpiece or tortuous deformation.

Fifth, in the use of grasping steel machine processing pipe or plate, in order to avoid workpiece deformation, should be used appropriate support and reinforcement measures to ensure the stability of the workpiece shape and size. At the same time, also need to take care to avoid damage to the pipe or plate surface.

Through the above problems, we can see that in the use of steel grabbing machine, we need to operate in strict accordance with the regulations, and pay more attention to the use of equipment. Only in this way, to ensure the safety and reliability of the grasping steel machine, in the production process to play a greater role.