The high water temperature of the wood grabber is a problem often encountered by many old masters of the wood grabber. How is it that leads to this common failure? Here we summarize the reasons for the high water temperature of the wood grabber for you:

1. In the harsh environment in which the wood grabbing machine works for a long time, it is difficult to avoid a lot of debris and dust falling into the surrounding of the engine, so the habitual inspection and removal of debris near the equipment can be beneficial to reduce the temperature of the engine.

2. If the fan is working normally, it is also necessary to check whether the transmission belt of the transmission system is loose. If the transmission belt of the transmission system is too loose or too tight, the water temperature will rise quickly.

3, Whether the front of the cooling tower is blocked by debris prevents the heat pipe heat dissipation gas flow, excessive oil stains on the engine surface will also harm the heat pipe heat dissipation.

4, the water flow is too little or the storage tank has leakage marks, it is the daily maintenance work, if the water temperature is high, also to check the water circulation system is not all normal, check the way is to touch the heat pipe radiator inlet pipe and water pipe temperature is not large, If the temperature difference is great, check whether the centrifugal pump is not working properly or the water temperature sensor cannot be opened.

5, there are stains in the waterway, resulting in a reduction of water output, a period of time to clean the water cooler is also one of the new maintenance projects.

6, the amount of engine oil is also harmful to the water temperature, should maintain the basic category.

7, the proper application of antifreeze, if your machine in the addition of antifreeze evaporation, that you add is not ethylene glycol antifreeze, because the real ethylene glycol antifreeze melting point can do 105-110 degrees, higher than the boiling point of water, is not easy to evaporate.

8. If it is a fully computer-controlled machine, there is too much or too small oil in the gasoline pump, or the wrong Angle of the oil pump, which is also very easy to lead to high water temperature.

9. The broken water tank cover of the wooden grasping machine also causes the water temperature to rise. Because the water tank cover is broken, it will be very easy to cause the water inlet in the case of the water circulation system. So the water temperature will be higher.

10. The load of the wood-grabbing machine engine, the ignition is too late, and the total pump output power of the hydraulic press is overweight, which will also lead to high water temperature.